qCMOS C15550-22UP CXP FPGA Solution
qCMOS C15550-22UP CXP FPGA Solution
1 Introduction
The Hamamatsu ORCA-Quest 2 (C15550-22UP) is a scientific-grade camera built on a back-illuminated qCMOS sensor. It features a 9.4-megapixel (4096×2304) full-frame format and extremely low read noise, and it is widely used in quantum control and measurement, fluorescence microscopy, and other fields.



The camera communicates with a host computer over CoaXPress 6.25Gbps X4 or USB3. CXP is an asymmetric, high-speed, point-to-point serial transmission protocol used mainly to carry video and still images, with cabling typically based on one or more coaxial cables. The maximum speed of the current 2.0 standard is 12.5Gbps on a single lane; besides image data, each lane can also carry low-speed control signals (41.6Mbps) and can deliver power to the camera over the same cable, i.e. “Power-over-Coax”, with a single cable reaching up to 100m. The Hamamatsu qCMOS camera is specified at 6.25Gbps x4.
Only through the CXP interface can the camera reach its peak performance and the lowest latency. Users therefore have two requirements:
1. A PCIe CXP frame grabber controls the camera—exposure, frame size, triggering, etc.—captures the images, and then transfers the image data to host memory over the PCIe interface for subsequent storage or processing;
2. In quantum computing and life sciences, to achieve even lower latency, image processing and peripheral control need to run on the FPGA for personalized compute acceleration.
In response to the requirements above, Xingce offers a rich and easy-to-use range of solutions for users to choose from. All of them aim to give customers a plug-and-play experience, lower the development barrier, and let customers focus more on their own scientific and engineering goals.
1. Standard PCIe CoaXPress image acquisition card, PCIe-1004 4-Channel CoaXPress Frame Grabber – Chongqing Xingce Electronic Technology Co., Ltd.
2. Embedded FMC-CXP-4R daughter card FMC-CXP-4R 4-Channel CoaXPress FMC Daughter Card – Chongqing Xingce Electronic Technology Co., Ltd.
2 PCIe-1004 4-Channel CoaXPress Frame Grabber
The PCIe-1004 4 Channel CoaXPress Frame Grabber is a high-performance quad-channel CoaXPress (CXP) image acquisition card designed for industrial imaging applications. It supports the latest CoaXPress V2.0 standard and can carry high-speed image data and power simultaneously over a single coaxial cable (Power over CoaXPress, PoCXP), simplifying system integration and wiring complexity. It also provides rich external and internal expansion interfaces to meet a wide range of industrial automation needs.
The PCIe-1004 uses a Xilinx Kintex UltraScale FPGA as its core processing unit, delivering powerful real-time image pre-processing capability and flexible user-logic expansion options. Combined with up to 4GB of on-board DDR4 SDRAM, it ensures smooth operation even in high-frame-rate, large-data-volume scenarios.
For Hamamatsu’s qCMOS C15550-22UP series cameras and the different versions of the camera, PCIe-1004 is currently the only frame grabber in the industry, apart from the official one, that supports plug-and-play for this camera series. PCIe-1004 supports not only Hamamatsu scientific cameras but also many scientific and industrial cameras—including those from Zhongke Junda, Xingtu, and Deep Vision—offering excellent compatibility.
https://mp.weixin.qq.com/s/M9sGMIUz8BJal2x6JPv2DA
https://mp.weixin.qq.com/s/wrwfWq6oMXh-U5-PFRvWdQ
Beyond the PCIe1004, Xingce’s other CXP frame grabber models also support plug-and-play for the C15550-22UP camera.
Frame grabber functions:
- Supports four independent CXP 2.0 inputs, with bandwidth up to 12.5Gbps per channel;
- Built-in PoCXP, powering the camera over the coaxial cable with a maximum power of 17W per channel;
- Provides the Aravis SDK and the GenTL Producer SDK, compatible with mainstream machine-vision software platforms;
- Equipped with rich External I/O interfaces (such as RS-485, optocoupler-isolated inputs/outputs, LVDS, TTL), suitable for complex industrial environments.
Frame grabber diagram

- 26-Pin I/O: the 26-pin input/output (I/O) interface on the panel, providing external digital signal inputs/outputs.
- LED×4: four LED indicators.
- HDBNC 12.5Gbps ×4: four CoaXPress HDBNC interfaces supporting the CXP-12 standard, with a maximum transmission rate of 12.5 Gbps per channel. Up to four CoaXPress cameras can be connected for high-resolution, high-speed image acquisition. Supports PoCXP, supplying 24V to the cameras.
- External I/O: the external I/O expansion interface, used to connect additional trigger signals, encoders, user-defined control lines, and so on.
- PCIe Gen3 x8 main-board connector: a PCIe Gen3 x8 physical interface that meets the high-speed data-return needs of multiple cameras.
- ATX power supply interface (6-pin): the PCIe auxiliary power interface for connecting an ATX power supply, providing an additional +12V input for the PoCXP function. When PoCXP power for CoaXPress cameras is enabled, this supply must be connected; otherwise the camera cannot be powered.
3 FMC-CXP-4R
The FMC-CXP-4R is a 4-channel CoaXPress FMC daughter card designed for personalized CXP image-acquisition scenarios. It supports up to 4-channel full-rate CXP-12 transmission and adapts to a variety of high-speed CXP camera data-acquisition needs.
- Supports PoCXP (Power over CoaXPress). Users may choose external power or on-board 12V power, with up to 17W per channel, meeting the power requirements of mainstream CXP cameras.
- Uses an FMC HPC high-density connector compliant with the VITA57.1 standard, adaptable to any FPGA card with an FMC HPC interface and fully supporting the entire Xilinx FPGA family.
- Can be paired with the HelloFPGA-Z19 carrier board to build a high-performance embedded CXP development platform, delivering an end-to-end solution of CXP camera control, high-speed data acquisition, and real-time processing.
- On-board 2Kb EEPROM (MT24C02) supports writing user-specific information; each channel has a dual-color LED indicator that can be driven through FPGA IO to any red/green combination for intuitive status display.

For the FMC-CXP-4R we offer a rich selection of FPGA carrier boards. Whether in PCIe, embedded MPSOC, or GPU form, all of these boards ship with the same software and SDK as our PCIe image acquisition cards, supporting plug-and-play as well as FPGA secondary development. Product category results page





Beyond our own in-house FPGA carrier boards, we also support plug-and-play on the Xilinx ZCU216 development board, letting users perform image processing and measurement-and-control tasks based on image-processing results on the latest RFSOC. A CoaXPress acquisition demo based on the RFSOC FPGA ZCU216 – Chongqing Xingce Electronic Technology Co., Ltd.
